Description A top quality polymer modified cementitious skim coat. It is specially formulated to be used as the undercoat on concrete surfaces and blockwalls. It is suitable for surface improvement on cement rendered surfaces. Hardened Base Grey surfaces can be further smoothened with Finish Coat.
Product Details Uses QuickMix™ Base Grey (380) is a top quality water-resistant polymer modified cementitious skim coat. It contains additives that improve workability, consistency, water retentivity and bond strength. It is specially formulated to be used as the undercoat on concrete surfaces and blockwalls. It is also suitable for suitable for surface improvement on cement rendered surfaces. Hardened QuickMix™ Base Grey surfaces can be further smoothened with Skim Coat - Finish Coat. QuickMix™ Base Grey should not be used on painted surfaces.
Advantages - Pre-mixed to ensure good consistent quality - Pre-packed for convenience in handling - Good workability - High bonding strength - Minimizes cracking - High durability
Surface Preparation - All surfaces must be clean, free from dust, oil and any trace of foreign materials. - Surface defects exceeding 5 mm may be patched with QuickMix™ Thin Plaster (386) or QuickMix™ QuickRender™ (387). - For dry or high absorbing substrates, moisten the surface with water prior to application.
Mixing - Mix one bag (25 kg) of QuickMix™ Base Grey with approximately 6 litres of water. - Mix thoroughly with an electrical mixer for 3-5 minutes until the desired homogeneous paste is achieved. - Ensure the mix is free from lumps before use. - Remix for 1 minute if the mixed paste is left unused for more than 30 minutes.
Application - Apply QuickMix™ Base Grey onto the surface with a steel trowel. - If application requires a few layers, the underneath layers must be dry before applying the subsequent layers.
Packaging - QuickMix™ Base Grey is packed in 25 kg bags.
Storage - QuickMix™ Base Grey should be stored in dry place free from excessive moisture. - It has a shelf life of 6 months in its original packing.
Health & Safety - QuickMix™ Base Grey is non-hazardous. However, Lafarge Drymix recommends that appropriate safety equipment be worn by workers handling this product, including dust masks, rubber gloves, full eye protection and boots where necessary. In cast of contact with eyes, wash with plenty of water. If irritation persists, seek immediate medical attention. For further information, refer to the Material Safety Data Sheet.
Terms and condition
1. Goods sold are not returnable and refundable.
2.Upon confirmation of order, item(s) will be scheduled for delivery and will typically require a minimum of 7 up to 14 business days for item(s) arrival.
3. No unloading service included.
4. Goods condition must be verified within 3 days.